SEAT & BENCHES
Our thirty years experience in the municipal market has led us to offer standard weight and heavyweight designs of all timber seats and benches. These are offered in Iroko or seasoned European Oak, and are frequently specified for commemorative purposes.
TRADITIONAL TIMBER SEATING
A heavyweight seat having substantial timber sections that give increased strength, whilst retaining the inherent elegance of this traditional design. This model is principally intended for parks and other municipal uses.
This heavyweight seat is the most robust in our traditional range, and is designed for locations where appearance is important.
This top of the range heavyweight design is similar to the Cavendish seat, but has the addition of a more elaborate back rail, which particularly suits a plaque.
Our most popular standard weight seat for general use in areas where serious vandalism is unlikely.
The legs of this seat extend 750mm into the ground. The top face and edges of each seat board are planed, the remaining parts are rough sawn.
The legs of this seat extend 750mm into the ground. The top face and edges of each seat board are planed, the remaining parts are rough sawn.
This bench is designed for ground fixing like the Woodland Seat, with the legs extending 750mm into the ground, and also has seat boards planed on the top face and edges.
STEEL SEATING
These very popular all steel fully welded designs have tubular legs attached by tamper resistant bolts. The seat is a very comfortable shape, and can be supplied with or without arms. They are equally suited to town centre or park applications.
These very popular all steel fully welded designs have tubular legs attached by tamper resistant bolts. The seat is a very comfortable shape. They are equally suited to town centre or park applications.
Organically curved, with a hint of the traditional about it, this attractive seat has been designed for contemporary environments. It is supplied as standard in pedestal base form.
These designs are cost effective, immensely strong and resistant to vandalism. They are Street-Tough finished as standard, but if costs need to be kept down can be specified in our Acrylic Coating. Both the Harlech Seat and Newport Bench are available with a rounded corner option for a small additional charge. This adds an element of elegance not normally associated with such utilitarian seating.
These designs are cost effective, immensely strong and resistant to vandalism. They are Street-Tough finished as standard, but if costs need to be kept down can be specified in our Acrylic Coating.
The Warwick All Steel Seat applies the elegant design principles of our all timber traditional range to an immensely strong all steel construction. This results in a seat which looks perfectly at home in a variety of formal and traditional settings, with an unparalleled level of durability.
Immensely strong and durable, the Telford is an attractive, contemporary all steel seat. Its sleek, modern design makes it suitable for a variety of urban environments where more traditional seats may look out of place
Elegant yet practical, this design dates from the end of the nineteenth century.
Cast Iron Seating
This seat pays tribute to the classic age of simple, elegant proportions and is equally suited to town centre or park use. The base and back are gently curved, for maximum comfort, and the seat height is perfect for most users. The leading edge of the front board has been 16mm radius pencil rounded, again for comfort.
This seat combines the quality and longevity of cast iron with a design equally applicable to contemporary environments, and to areas with more traditional architecture. Substantial frames and very heavy boards make even the standard version of this seat particularly suitable for high usage areas. The curved back board illustrated is now standard on this design, and the current date is also cast in as standard. Heavy duty version also available.
This seat uses quatrefoils and other architectural detailing to create a more overtly elaborate design typical of the Victorian era. This design looks particularly effective in a formal park environment in dark green 14C40, which is a standard colour option. The basic shape and seat height etc. are the same as the Georgian seat.
Both the Georgian and Victorian castings can be used to build continuous seats of any length.
Octagonal units are ideal for encircling planters, trees or other architectural features, and are supplied in four standard sizes, with boards in either iroko or seasoned oak.
Steel & Timber Seating
Our most popular seat in this range combining an attractive appearance with a solid construction. It is suitable for a wide variety of locations, and is often specified for commemorative purposes.
A comfortable heavy duty seat, with very substantial boards, particularly suitable for landscape schemes in a wide variety of environments. The boards are secured from the rear by stainless steel pin-in-socket fastenings, which go through the frames into timber inserts in the boards. These fastenings are secure and discreet.
The Cambourne is an attractive, contemporary seat. It is suitable for a variety of modern urban environments where more traditional designs may look out of place. It is also available with recycled plastic boards.
The elegance of this traditional seat, which originates from the end of the nineteenth century, is obvious. Subtle alterations to its construction have been made to make the seat both stronger and easier to manufacture, without compromising the integrity of the original design. The metal frames are Street-Tough finish as standard. The stainless steel cap head bolts which secure the slats to the frames are countersunk.
The Chirk bench is economical, and enables the sitter to face either way. It is often specified for children’s recreational areas and school playgrounds.
The Highland Seat suits rural applications where a simple all timber seat Steel Framed Seats might traditionally be used, but where maximum durability and ease of maintenance are prime concerns. The immensely strong steel frames are hot-dip galvanized before painting and have a much longer potential lifespan than any comparable wooden frames. The boards are easily replaced, and the seat is fully recyclable, giving it excellent environmental credentials.
The Pentland Bench suits rural applications where a simple all timber bench might traditionally be used, but where maximum durability and ease of maintenance are prime concerns.
The immensely strong steel frames are hot-dip galvanized before painting and have a much longer potential lifespan than any comparable wooden frames. The boards are easily replaced, and the seat is fully recyclable, giving it excellent environmental credentials.
Recycled Plastic Seating
The Cambourne is an attractive, contemporary seat. It is suitable for a variety of modern urban environments where more traditional designs may look out of place. It is also available with Iroko or seasoned Oak boards.
Organic curves distinguish this seat, which has a wider, shaped boards on the base and back. Available with either mild or stainless steel frames with extended legs to concrete in as standard. Stainless steel framed versions use grade 316, satin polished.
The Hereford is a substantial and attractive seat with boards and frames made from recycled plastic. It is suitable for a variety of rural and semi-rural environments including country parks, waterside areas and urban green-spaces.
This polyboard equivalent of our Monmouth Seat is very cost effective and suitable for general park, play area and street use. The frames are dark green 14C40 as standard, though black frames are an option at no extra cost.
A development of our Colwyn Seat, a wider, shaped board on the base and back make this seat particularly comfortable. The frames are blue 20C40 as standard, though the black frames illustrated here are an option at no extra cost.
Designed to partner the Stirling Seat, the tulip shaped frames of this bench look very elegant. It has two wider, shaped boards on the base.
Designed to partner the Stirling Seat, the tulip shaped frames of this bench look very elegant. It has two wider, shaped boards on the base.
The Highland Seat suits rural applications where a simple all timber seat Steel Framed Seats might traditionally be used, but where maximum durability and ease of maintenance are prime concerns. The immensely strong steel frames are hot-dip galvanized before painting and have a much longer potential lifespan than any comparable wooden frames. The boards are easily replaced, and the seat is fully recyclable, giving it excellent environmental credentials.
The Pentland Bench suits rural applications where a simple all timber bench might traditionally be used, but where maximum durability and ease of maintenance are prime concerns.
The immensely strong steel frames are hot-dip galvanized before painting and have a much longer potential lifespan than any comparable wooden frames. The boards are easily replaced, and the seat is fully recyclable, giving it excellent environmental credentials.
